Edit Profiles
=============

RK has 10 profiles of each 250 assignable buttons.
So you can arrange an accurate button combination for your
special application.

Table of contents
-----------------
- How to open the Profile Edit requester
- Gereral
- Profile Name
- "Matrix" section
- "Button & Font Size" section
  - Width/Height
  - Fontsize/Bold
  - Test area
- "Auto-Switch at window title" section
- "Background Colors" section
  - "Empty Buttons"
  - "Graphics"
- "Clear & Copy" section
  - "Clear profile" button
  - "Copy profile" button
- "Import/Export" buttons
- "Save window position" checkbox
  - "...with relative Co-ordinates" checkbox



How to open the Profile Edit dialog
-----------------------------------
There are several possibilities available to open the Profile
Edit dialog.

- By selecting from pull-down menu (open it with F1 before)
- By selecting from Systray popmenu
- By mouse click on a button which is assigned with
  {/ME.PROF.EDIT} or {/ME.POP.ALL} or {/ME.POP.REQUEST}
- By keystroke [F3] (if RK has the focus and standard f-key
  assignment has not changed)


General
-------
Changes will be affect to the profile which is just present on
RK window only.
A click on the "OK" button will save your adjustments on disk in 
the file "Profiles\Profiles.dat".


Profile Name
------------
Each profile has an own name which is shown in the window title
and (popup) menus.
The profile name can be changed in the first line of the profile 
dialog.


"Matrix" section
----------------
Columns can be adjusted from 1 to 25 buttons.
Rows can be adusted from 1 to 10 buttons.
So maximum span is 25x10 = 250 buttons.

--> Note
A window with border must have a minimum size (=> Windows).
Values smaller than 5 buttons for columns are useful only if
using profiles with a big button width or if using a borderless
panel.


"Button & Font Size" section
----------------------------
Change button width/ height and fontsize/bold and see the result
in the test area. Use the input line over the test area to change
the shown demo text "Abc". There is no limitation of selected
sizes but the test area can show sizes to 10 only. Therefore
there is a little green arrow sign to give information about the
limited view.


"Auto-Switch at window title" lines
-----------------------------------
This chapter has an own text file (see "Auto - Switch.txt")


"Background Colors" section
---------------------------
For usual unassigned RK-buttons are white. In this area the back-
ground color for empty buttons can be changed.
The Background color for graphics can be adapt to the background
colors of the shown graphics.


"Clear profile" button
----------------------
An empty profile has the maximum numbers of columns and rows.
All buttons are empty except the "opt" button. This standard
button should be (not must be) on each profile at the same
place.

Note! Since v5.8 this job can be done in ProfCenter.


"Copy profile" button
---------------------
This is useful if a new profile should be similar to an existing
one.

A click on this button will open a new dialog. From the
combobox it can be choosed which profile will overwrite the just
selected one.


"Import/Export" buttons
-----------------------
This is useful if you work with more than one profiles.dat or
more than 10 profiles.
This can be required if you want to change single profiles from
different computer.
.. Or if you make a RK update. .. Or if you need space to change 
the profile order.

--> Note
You can import a profile from an older RK version.

Exported profiles will be saved in the profiles folder. The file
names are given automatically based on the profile names.

Note! Since v5.8 this job can be done in ProfCenter.


"Save window position" checkbox
-------------------------------
If this box is selected the position of RK window will be saved, 
but valid for this profile only. So you can adjust different
window positions for each profile.


"...with relative Co-ordinates"
-------------------------------
This checkbox is available only if Save window pos. is selected.
The position will not be saved with absolute co-ordinates but with
relative. Relative meens the relative position to the screen border.
RK notice when the user tries to center the window (25% from the middle
area of the window must cover the center of the screen) and will save
an auto-center-flag instead of horizontal co-ordinates.
